International Electrotechnical Commission System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres (IECEx System)
ExTAG Committee Documents
Introduction
The committee documents are password-protected. To obtain a username and password contact the IECEx Secretariat. When documents are no longer current they are moved to the Archive.
Active Documents Requiring Comment and/or Voting
-
Document No.TitleDue Date
-
ExTAG/561/CD Draft ExTAG Decision Sheet – Opening of Sealed devices on frequent basis (e.g. for charging)
17/07/2019 -
ExTAG/560/CD - Draft ExTAG Decision Sheet – Infallible Shunt Safety Assemblies for voltage limitation of intrinsically safe equipment
17/07/2019 -
Draft Decision Sheet -Revision of ExTAG DS 2012/010 Medium for Documenting Required Instructions
09/07/2019
-
Document No.Posted DateTitle
-
06 June 2019
ExTAG/561/CD Draft ExTAG Decision Sheet – Opening of Sealed devices on frequent basis (e.g. for charging)
-
06 June 2019
ExTAG/560/CD - Draft ExTAG Decision Sheet – Infallible Shunt Safety Assemblies for voltage limitation of intrinsically safe equipment
-
29 May 2019
Compilation of comments and observations on ExTAG/538A/CD Revised Draft ExTAG Decision Sheet - Construction requirements for flameproof enclosures with an internal source of release (containment system)
-
28 May 2019
Draft Decision Sheet -Revision of ExTAG DS 2012/010 Medium for Documenting Required Instructions
-
23 May 2019
Compilation of comments and observations on ExTAG/539A/CD – Revised Draft ExTAG Decision Sheet - Risk of ignition from primary and secondary lithium cells and batteries
-
13 May 2019
Notification of use of IEC 62784 in the IECEx 02 Certified Equipment Scheme
-
11 April 2019
Compilation of Comments on ExTAG/531/CD re-non-closely coupled single packaged opto-isolators
-
11 April 2019
Compilation of comments and observations on ExTAG/540/CD - Draft ExTAG Decision Sheet – Smartphone or a tablet containing a LED to support a camera function.
-
03 April 2019
Compilation of comments and observations on - Draft ExTAG Decision Sheet ExTAG/536/CD Suffix “X” and “U” to the certificate.
-
28 March 2019
Compilation of comments and observations on ExTAG/522A/CD-Spark Assessment involving a combination of resistive and capacitive parameters
-
04 March 2019
ExTAG/545/CC Compilation of comments and observations on ExTAG/539/CD Draft ExTAG Decision Sheet - Risk of ignition from primary and secondary lithium cells and batteries
-
28 March 2019
ExTAG/544/CD – Revision of ExTAG Decision Sheet 2018/006 – Creepage distances and clearances of non-sparking ballast in non-sparking luminaire
-
20 February 2019
Compilation of comments and observations on ExTAG/538/CD Draft ExTAG Decision Sheet - Construction requirements for flameproof enclosures with an internal source of release (containment system)
-
28 December 2018
Compilation of comments and observations on ExTAG/520A/CD Draft Revised ExTAG Decision Sheet – Cell or Battery testing for type of protection “ib”
-
11 April 2019
ExTAG/540A/CD - Revised Draft ExTAG Decision Sheet – Smartphone or a tablet containing a LED to support a camera function
-
18 December 2018
Draft ExTAG Decision Sheet – Smartphone or a tablet containing a LED to support a camera function.
-
04 March 2019
ExTAG/539A/CD Revised Draft ExTAG Decision Sheet - Risk of ignition from primary and secondary lithium cells and batteries
-
20 November 2018
Draft ExTAG Decision Sheet - Risk of ignition from primary and secondary lithium cells and batteries
-
20 February 2019
ExTAG/538A/CD Revised Draft ExTAG Decision Sheet - Construction requirements for flameproof enclosures with an internal source of release (containment system)
-
08 November 2018
Draft ExTAG Decision Sheet - Construction requirements for flameproof enclosures with an internal source of release (containment system)
-
27 September 2018
Decision list from The Twentieth Meeting of the ExTAG held in Cannes, France on 18th and 19th September 2018
-
03 April 2019
ExTAG/536A/CD Revised Draft ExTAG Decision Sheet - Suffix “X” and “U” to the certificate.
-
10 September 2018
Draft ExTAG Decision Sheet ExTAG/536/CD Suffix “X” and “U” to the certificate.
-
10 September 2018
Revised Draft ExTAG Decision Sheet ExTAG/535/CD - Undercut of internal metric threads in Ex d enclosure.
-
10 September 2018
Draft ExTAG Decision Sheet ExTAG/534/CD -Measurement of Pressure of several intercommunicating compartments in Ex d products.
-
05 September 2018
Report from ExTAG Working Group 14 (WG14): Certification of Ex Equipment assemblies
-
11 April 2019
ExTAG/531A/CD Draft Revised ExTAG Decision Sheet re-non-closely coupled single packaged opto-isolators
-
04 September 2018
Draft ExTAG Decision Sheet, ExTAG/531/CD re-non-closely coupled single packaged opto-isolators
-
24 August 2018
Compilation of comments and observations on ExTAG/500/CD Draft ExTAG Decision Sheet – CoCs for Ex Equipment against performance standards
-
28 August 2018
Document for discussion at the 2018 ExTAG Cannes meeting - Compilation of comments and observations on ExTAG/499A/CD Revised Draft ExTAG Decision Sheet – Modular concept for electrical Ex Equipment
-
03 September 2018
Compilation of comments and observations on ExTAG/462A/CD Draft ExTAG Decision Sheet-Creepage distances and clearances of non-sparking ballast in non-sparking luminaire
-
04 September 2018
Report from ExTAG Working Group 01 (WG01):Preparation of assessment and test report forms (ExTRs)
-
30 August 2018
Draft revision of OD 017 Drawing and documentation Guidance for IEC Ex Certification – for use by Manufacturers and ExTLs
-
23 August 2018
Document for discussion at the 2018 ExTAG Cannes meeting - Compilation of comments and observations on ExTAG/502/CD - Draft New ExTAG Decision Sheet – Application of IEC 60079-28 (replacement for previous Draft DS 2017/003A (ExTAG/484/CD)
-
21 August 2018
Document for discussion at the 2018 ExTAG Cannes meeting – Construction requirements for flameproof enclosures with an internal source of release (containment system)
-
28 March 2019
Draft Revised ExTAG Decision Sheet – ExTAG/522B/CD Spark Assessment involving a combination of resistive and capacitive parameters
-
12 October 2018
Spark Assessment involving a combination of resistive and capacitive parameters
-
21 August 2018
Document for discussion at the 2018 ExTAG Cannes meeting – Spark Assessment involving a combination of resistive, capacitive and inductive parameters
-
21 August 2018
Compilation of comments and observations on ExTAG/487/CD - Draft ExTAG Decision Sheet – Application of requirement for material remaining under a blind hole in flameproof enclosures
-
28 December 2018
Draft Revised ExTAG Decision Sheet – Cell or Battery testing for type of protection “ib”
-
12 October 2018
Draft ExTAG Decision Sheet – Cell or Battery testing for type of protection “ib”
-
21 August 2018
Draft ExTAG Decision Sheet – Cell or Battery testing for type of protection “ib”
-
10 August 2018
Compilation of comments and observations on ExTAG/493/CD Draft ExTAG Decision Sheet – Transferred charge test for electrostatics re-implemented, but without option for dust
-
10 September 2018
Revised Draft Agenda - The Twentieth Meeting of the ExTAG to be held in Cannes France September 2018
-
07 September 2018
Draft Agenda - The Twentieth Meeting of the ExTAG to be held in Cannes France September 2018
-
06 September 2018
Draft Agenda - The Twentieth Meeting of the ExTAG to be held in Cannes France September 2018
-
24 August 2018
Draft Agenda - The Twentieth Meeting of the ExTAG to be held in Cannes France September 2018
-
24 August 2018
IECEx ExTAG and Assessor Training Workshop to be held Tuesday 18th September 2018
-
23 August 2018
Compilation of comments and observations on ExTAG/501/CD Draft Revision of ExTAG DS 2013/001-Temperature measurement of cable entries on electrical machines.
-
27 July 2018
Compilation of comments and observations on ExTAG/478A/CD Revised Draft Decision Sheet - The spark ignition test with super capacitor
-
27 July 2018
Compilation of comments and observations on ExTAG/477A/CD Draft Revised ExTAG Decision Sheet – The resistance to impact test according to IEC 60079-0
-
11 July 2018
Compilation of comments and observations on ExTAG/498/CD Draft ExTAG Decision Sheet – QARs for equipment covered by standards other than those for specific Types of Protection.
-
03 July 2018
Compilation of comments and observations on ExTAG/471/CD Draft ExTAG Decision Sheet – Static versus dynamic stresses on a Sealed device
-
03 July 2018
Compilation of comments and observations on ExTAG/499/CD Draft ExTAG Decision Sheet – Modular concept for electrical Ex Equipment
-
27 June 2018
Compilation of comments and observations on ExTAG/462/CD Draft ExTAG Decision Sheet – Creepage distance and clearance of non-sparking ballast according to IEC 60079-15
-
15 June 2018
Compilation of comments and observations on ExTAG/491/CD Draft Decision Sheet - Clearances and creepage distances in pollution degree 2 environments
-
08 June 2018
Compilation of comments and observations on ExTAG/490A/CD Draft Revision of ExTAG OD 035 - A procedure to generate, discuss, report and publish ExTAG Decision Sheets (2.1)
-
10 July 2018
Notification of launch of facility for ExCBs to independently create and issue Ex Component Certificates
-
23 August 2018
Draft New ExTAG Decision Sheet – Application of IEC 60079-28 (replacement for previous Draft DS 2017/003A (ExTAG/484/CD)
ExTAG 502A CD Rev DS 2017 003 IEC 60079 28 MT 60079 28 modTH 003
-
01 May 2018
Draft New ExTAG Decision Sheet – Application of IEC 60079-28 (replacement for previous Draft DS 2017/003A ExTAG/484/CD)
-
20 April 2018
Draft Revision of ExTAG DS 2013/001-Temperature measurement of cable entries on electrical machines.
-
11 April 2018
Draft ExTAG Decision Sheet – CoCs for Ex Equipment against performance standards
-
05 April 2018
Draft ExTAG Decision Sheet – QARs for equipment covered by standards other than those for specific Types of Protection.
-
05 April 2018
Compilation of comments and observations on ExTAG/482A/CD Draft Revision of ExTAG Decision Sheet DS 2015/016 – Testing of thermocatalytic sensors with Ex ia IIC marking
-
27 March 2018
Compilation of comments and observations on ExTAG/490/CD Draft Revision of ExTAG OD 035 - A procedure to generate, discuss, report and publish ExTAG Decision Sheets (2.1).
-
25 May 2018
Revised Compilation of comments and observations on ExTAG/478/CD Draft ExTAG Decision Sheet – The spark ignition test with super capacitor
-
09 March 2018
Compilation of comments and observations on ExTAG/478/CD Draft ExTAG Decision Sheet – The spark ignition test with super capacitor
-
09 March 2018
Compilation of comments and observations on ExTAG/477/CD Draft ExTAG Decision Sheet – The resistance to impact test according to IEC 60079-0
-
07 March 2018
Draft ExTAG Decision Sheet – Transferred charge test for electrostatics re-implemented, but without option for dust
-
06 February 2018
Compilation of comments and observations on ExTAG/486/CD – Draft Revision of ExTAG Decision Sheet DS 2012/011– Resistance to light of elastomeric materials
-
05 February 2018
Draft ExTAG Decision Sheet - Clearances and creepage distances in pollution degree 2 environments
-
08 June 2018
Draft Revision of ExTAG OD 035 - A procedure to generate, discuss, report and publish ExTAG Decision Sheets (2.1).
-
27 March 2018
Draft Revision of ExTAG OD 035 - A procedure to generate, discuss, report and publish ExTAG Decision Sheets (2.1)
-
05 February 2018
Draft Revision of ExTAG OD 035 - A procedure to generate, discuss, report and publish ExTAG Decision Sheets (2.1).
-
16 February 2018
IECEx Certificates of Conformity – Singapore Reverses Decision to withdraw from being a Member of the IECEx Management Committee and hence remains a Participating Country – Application of CHF 500 per Certificate issue to manufacturers and applicants located in non-participating countries, now cancelled
-
03 January 2018
IECEx Certificates of Conformity – Singapore Decision to withdraw from being a Member of the IECEx Management Committee and hence a non-Participating Country effective 1 January 2018 – Application of CHF 500 per Certificate issue to manufacturers and applicants located in non-participating countries, now includes Singapore
-
28 December 2017
Decision list from The Nineteenth Meeting of the ExTAG held in Washington DC, USA on 26th September 2017
-
21 August 2018
Draft ExTAG Decision Sheet – Application of requirement for material remaining under a blind hole in flameproof enclosures
-
20 December 2017
Draft ExTAG Decision Sheet – Application of requirement for material remaining under a blind hole in flameproof enclosures
-
04 December 2017
Draft Revision of ExTAG Decision Sheet DS 2012/011– Resistance to light of elastomeric materials
-
18 September 2017
Compilation of comments and observations on ExTAG/458/CD Draft ExTAG Decision Sheet – Location of Electrostatic Discharge Hazard Warning
-
06 December 2017
Draft Revision of ExTAG Decision Sheet DS 2015/016 – Testing of thermocatalytic sensors with Ex ia IIC marking
-
18 September 2017
Draft Revision of DS 2015/016 Testing of thermocatalytic sensors with Ex ia IIC marking
-
13 September 2017
Compilation of comments on ExTAG/455/CD Draft ExTAG Decision Sheet – Proposed Revision of ExTAG DS 2015/015 Enclosures welded or brazed together
-
04 September 2017
IECEx ExTAG and Assessor Training Workshop to be held Monday 25th September 2017
-
04 September 2017
IECEx ExTAG and Assessor Training Workshop to be held Monday 25th September 2017
-
27 July 2018
ExTAG/478B/CD Revised Draft Decision Sheet - The spark ignition test with super capacitor
-
09 March 2018
Revised Draft Decision Sheet - The spark ignition test with super capacitor
-
09 March 2018
Revised Draft ExTAG Decision Sheet – The resistance to impact test according to IEC 60079-0
-
31 October 2017
Draft ExTAG Decision Sheet – The resistance to impact test according to IEC 60079-0
-
20 September 2017
Compilation of comments and observations on ExTAG/460/CD Draft ExTAG Decision Sheet – The tensile force of cable pull test according to IEC 60079-18
-
18 September 2017
Revised Draft ExTAG Decision Sheet – Guidance on practical realization of OD 203 provisions
-
18 September 2017
Compilation of comments and observations on ExTAG/457/CD Draft ExTAG Decision Sheet – Guidance on practical realization of OD 203 provisions
-
18 September 2017
Report from ExTAG Working Group 01 (WG01): Preparation of assessment and test report forms (ExTRs)
-
07 September 2017
Report from ExTAG Working Group 01 (WG01): Preparation of assessment and test report forms (ExTRs)
-
07 November 2017
Draft ExTAG Decision Sheet – Static versus dynamic stresses on a Sealed device
-
07 September 2017
Compilation of comments and observations on ExTAG/452/CD Draft ExTAG Decision Sheet – Requirements for gas sensors using the “da” level of protection
-
07 September 2017
Compilation of comments and observations on ExTAG/447/CD Draft Decision Sheet – Marking of combined Electrical/Non Electrical Equipment
-
05 September 2017
Compilation of comments and observations on ExTAG/453/CD Draft ExTAG Decision Sheet - Terminal Ratings in General Purpose Junction Boxes
-
07 September 2017
Draft Agenda - The Nineteenth Meeting of the ExTAG to be held in Washington D.C. (USA) on 26th September 2017
-
31 August 2017
Compilation of comments and observations on ExTAG/451/CD Draft ExTAG Decision Sheet – Application of IEC 60079-28
-
28 August 2017
Compilation of comments and observations on ExTAG/456/CD Draft ExTAG Decision Sheet – Temperature rise of the conductor bar for terminals in Level of Protection “eb” according to IEC 60079-7
-
05 September 2018
ExTAG/462B/CD Draft ExTAG Decision Sheet – Creepage distance and clearance of on-sparking ballast according to IEC 60079-15
-
27 June 2018
Draft ExTAG Decision Sheet-Creepage distances and clearances of non-sparking ballast in non-sparking luminaire
-
31 October 2017
Draft ExTAG Decision Sheet – Creepage distance and clearance of on-sparking ballast according to IEC 60079-15
-
08 August 2017
Compilation of comments and observations on ExTAG/445B/CD Draft ExTAG Decision Sheet – Guidance on issuance of QARs when products are manufactured at multiple site
-
07 August 2017
Draft ExTAG Decision Sheet – The tensile force of cable pull test according to IEC 60079-18
-
18 September 2017
Revised Draft ExTAG Decision Sheet – Location of Electrostatic Discharge Hazard Warning
-
06 July 2017
Draft ExTAG Decision Sheet – Location of Electrostatic Discharge Hazard Warning
-
18 September 2017
Revised Draft ExTAG Decision Sheet – Guidance on practical realization of OD 203 provisions
-
06 July 2017
Draft ExTAG Decision Sheet – Guidance on practical realization of OD 203 provisions
-
05 September 2018
Draft ExTAG Decision Sheet – Assessment of change to standard for certificate up-issue
-
28 August 2017
Draft ExTAG Decision Sheet – Temperature rise of the conductor bar for terminals in Level of Protection “eb” according to IEC 60079-7
-
03 July 2017
Draft ExTAG Decision Sheet – Temperature rise of the conductor bar for terminals in Level of Protection “eb” according to IEC 60079-7
-
23 June 2017
Draft ExTAG Decision Sheet – Proposed Revision of ExTAG DS 2015/015 Enclosures welded or brazed together
-
26 June 2017
Compilation of comments and observations on ExTAG/450/CD Draft ExTAG Decision Sheet – Cable transit or entry devices according to IEC 60079-0
-
23 June 2017
Compilation of comments and observations on ExTAG/450/CD Draft ExTAG Decision Sheet – Cable transit or entry devices according to IEC 60079-0
-
05 September 2017
Revised Draft ExTAG Decision Sheet - Terminal Ratings in General Purpose Junction Boxes
-
30 May 2017
Draft ExTAG Decision Sheet - Terminal Ratings in General Purpose Junction Boxes
-
18 May 2017
Draft ExTAG Decision Sheet – Requirements for gas sensors using the “da” level of protection
-
06 April 2017
Draft ExTAG Decision Sheet – Cable transit or entry devices according to IEC 60079-0
-
26 May 2017
Compilation of comments and observations on ExTAG/445/CD Draft Decision Sheet – Guidance on issuance of QARs when products are manufactured at multiple sites
-
31 March 2017
Compilation of comments and observations on ExTAG/443/CD Draft Decision Sheet – Reference pressure testing of devices with flame arrestors
-
07 September 2017
Revised Draft ExTAG Decision Sheet – Marking of combined Electrical/Non Electrical Equipment
-
24 March 2017
Draft ExTAG Decision Sheet – Marking of combined Electrical/Non Electrical Equipment
-
16 May 2017
Draft ExTAG Decision Sheet – Guidance on issuance of QARs when products are manufactured at multiple site
-
30 November 2016
Draft ExTAG Decision Sheet – Guidance on issuance of QARs when products are manufactured at multiple sites
-
15 November 2016
Compilation of comments on ExTAG/440/CD Draft Decision Sheet - Application of Failure Analysis such as FMEA in intrinsic safety “i”
-
11 November 2016
Draft ExTAG Decision Sheet – Reference pressure testing of devices with flame arrestors
-
23 September 2016
NOTICE TO ALL ExCBs - ExMC Decision to Amend OD 233 – re IEC 60079-33
-
06 October 2016
Confirmed Decision list from The Eighteenth Meeting of the held in Umhlanga, South Africa on 6th September 2016
-
15 September 2016
Draft Decision list from The Eighteenth Meeting of the ExTAG held in Umhlanga, South Africa on 6th September 2016
-
13 September 2016
Draft ExTAG Decision Sheet – Application of Failure Analysis such as FMEA in intrinsic safety “i”
-
22 August 2016
Discussion paper from the IECEX Chairman, Dr Arnhold – Independent Verifiers as referenced by IECEx OD 233
-
03 September 2016
Report from ExTAG Working Group 01 (WG01):Preparation of assessment and test report forms (ExTRs)
-
31 August 2016
Compilation of comments on ExTAG/420/CD Draft Decision Sheet - Calculation proving compliance of all components on which intrinsic safety depends with IEC 60079-11
-
05 September 2016
Compilation of comments on ExTAG/420/CD Draft Decision Sheet - Calculation proving compliance of all components on which intrinsic safety depends with IEC 60079-11
-
19 August 2016
Proposal from PTB, DE, to discuss the application of IEC 60079-11 in relation to portable devices
-
22 August 2016
Report on Action Items from the Seventeenth Meeting of the ExTAG held In Christchurch, New Zealand 15th September 2015
-
12 August 2016
Compilation of comments on ExTAG/408/CD -Draft Operational Document - revision of OD 017 - Operational Document - Drawing and documentation Guidance for IEC Ex Certification – for use by Manufacturers and ExTLs
-
12 August 2016
Compilation of comments on ExTAG/409/CD Draft Decision Sheet - Question regarding differing interpretations of the scope of IEC 60079-28, prior to creating a Decision
-
31 August 2016
Compilation of comments with observations from the originator on ExTAG/406/CD Draft Revision to Decision Sheet DS 2012/005 - Inclusion of an IP rating as part of the marking and certificate
-
06 September 2016
Compilation of comments on ExTAG/419/CD Draft Decision Sheet - Additional requirements for flameproof enclosures with an internal source of release (containment system)
-
12 August 2016
Compilation of comments on ExTAG/419/CD Draft Decision Sheet - Additional requirements for flameproof enclosures with an internal source of release (containment system)
-
29 August 2016
Compilation of comments as well as observations on ExTAG/418/CD Draft Decision Sheet - Draft Operational Document – Retention of Records
-
12 August 2016
Compilation of comments on ExTAG/418/CD Draft Decision Sheet - Draft Operational Document – Retention of Records
-
30 August 2016
Compilation of comments on ExTAG/417/CD Draft Decision Sheet - Ex Marking of surge protection device for an intrinsically safe circuit in Zone 0
-
12 August 2016
Compilation of comments on ExTAG/417/CD Draft Decision Sheet - Ex Marking of surge protection device for an intrinsically safe circuit in Zone 0
-
03 August 2016
Report of the Surveillance Assessment of PTB in Germany as the IECEx Proficiency Testing Program Provider for compliance with ISO/IEC 17043 and OD 202.
-
03 August 2016
Draft Revision of IECEx OD 035 - A procedure to generate, discuss, report and publish ExTAG Decision Sheets
-
14 September 2016
Draft Agenda The Eighteenth Meeting of the ExTAG to be held in Umhlanga, South Africa on 6th September 2016
-
29 August 2016
Draft Agenda The Eighteenth Meeting of the ExTAG to be held in Umhlanga, South Africa on 6th September 2016
-
11 August 2016
Draft Agenda The Eighteenth Meeting of the ExTAG to be held in Umhlanga, South Africa on 6th September 2016
-
08 August 2016
IECEx ExTAG and Assessor Training Workshop to be held Monday 5th September 2016
-
02 August 2016
Compilation of comments and observations on ExTAG/411A/CD a revision of ExTAG/411/CD ExTAG Draft Decision Sheet – Enhanced clearance and creepage distances for equipment of Level of Protection “ec”
-
18 July 2016
Comments Table for ExTAG/420/CD Draft Decision Sheet Calculation proving compliance of all components on which intrinsic safety depends with IEC 60079-11
-
18 July 2016
Draft Decision Sheet - Calculation proving compliance of all components on which intrinsic safety depends with IEC 60079-11
-
29 June 2016
Draft Decision Sheet - Additional requirements for flameproof enclosures with an internal source of release (containment system)
-
29 June 2016
Comments Table for ExTAG/419/CD Draft Decision Sheet - Additional requirements for flameproof enclosures with an internal source of release (containment system)
-
27 June 2016
Comments Table for ExTAG/418/CD - Draft Operational Document – Retention of Records
-
21 June 2016
Comments Table for ExTAG/417/CD Draft Decision Sheet - Ex Marking of surge protection device for an intrinsically safe circuit in Zone 0
-
01 June 2016
Draft Decision Sheet - Ex Marking of surge protection device for an intrinsically safe circuit in Zone 0
-
01 June 2016
Compilation of comments and observations on ExTAG/412 /CD - Draft Decision Sheet - Evaluation of maximum surface temperatures for “ta”
-
01 June 2016
Compilation of Comments on ExTAG /411/CD Draft Decision Sheet - Enhanced clearance and creepage distances for equipment of Level of Protection “ec”
-
01 June 2016
Compilation of Comments on ExTAG /410/CD Draft Decision Sheet - Manually operated arcing or sparking components located within an enclosure (Revision DS 2008/005)
-
03 August 2016
Report of the Seventeenth Meeting of the ExTAG- Christchurch, New Zealand
-
07 April 2016
Draft Decision Sheet - Evaluation of maximum surface temperatures for “ta”
-
15 June 2016
Draft Decision Sheet - Enhanced clearance and creepage distances for equipment of Level of Protection “ec”
-
24 March 2016
Draft Decision Sheet - Enhanced clearance and creepage distances for equipment of Level of Protection “ec”
-
24 March 2016
Draft Decision Sheet - Manually operated arcing or sparking components located within an enclosure (Revision DS 2008/005)
-
24 March 2016
Draft Decision Sheet - Question regarding differing interpretations of the scope of IEC 60079-28, prior to creating a Decision
-
23 August 2016
Draft Operational Document - revision of OD 017 - Operational Document - Drawing and documentation Guidance for IEC Ex Certification – for use by Manufacturers and ExTLs
-
16 March 2016
Draft Operational Document - revision of OD 017 - Operational Document - Drawing and documentation Guidance for IEC Ex Certification – for use by Manufacturers and ExTLs
-
04 September 2017
Draft Revision to Decision Sheet DS 2012/005 - Inclusion of an IP rating as part of the marking and certificate
-
21 October 2015
Draft Revision to Decision Sheet DS 2012/005 - Inclusion of an IP rating as part of the marking and certificate
-
07 September 2015
Proposed revision of Draft Decision Sheet DS 2015/002 - Determination of faults
-
07 September 2015
DE Comments to ExTAG/400/CD - Proposed revision of OD 035 A procedure to generate, discuss, report and publish ExTAG Decision Sheets
-
03 September 2015
Compilation of comments on ExTAG/374/CD Draft ExTAG Decision Sheet – Securing of external plug and socket connections
-
01 September 2015
Preliminary Draft on “X” Specific Condition of Use and “U” Schedule of Limitations
-
31 August 2015
Draft ExTAG Decision Sheet Testing of thermocatalytic sensors with Ex ia IIC marking
-
28 August 2015
Proposed revision of OD 035 A procedure to generate, discuss, report and publish ExTAG Decision Sheets
-
20 August 2015
ExTAG/398/CC Compilation of comments on ExTAG/364A/CD Draft ExTAG Decision Sheet – Terminal Boxes open to the interior of the motor
-
20 August 2015
Compilation of comments on ExTAG/359/CD - Draft ExTAG Decision Sheet – Card Edge Connectors
-
20 August 2015
Compilation of comments on ExTAG/360/CD– Draft ExTAG Decision Sheet – Vibration test on partition walls
-
31 August 2015
Compilation of comments on Draft ExTAG Decision Sheet ExTAG/373/CD– Scope exception regarding LED light sources
-
07 September 2015
Compilation of comments ExTAG/353B/CD Draft ExTAG Decision Sheet – Draft ExTAG Decision Sheet – Flameproof joint for enclosure lid of non-cylindrical shape
-
28 August 2015
Compilation of comments and observations on ExTAG/341A/CD - Draft ExTAG Decision Sheet –Application of clause 9.2 Dielectric strength test of IEC 60079-18:2009
-
20 August 2015
Report from ExTAG Working Group 01 (WG01): Preparation of assessment and test report forms (ExTRs)
-
25 August 2015
IECEx ExTAG and Assessor Training Workshop to be held Monday 14th September 2015
-
07 September 2015
Draft Agenda The Seventeenth Meeting of the ExTAG to be held In Christchurch, New Zealand 15th September 2015
-
03 September 2015
Draft Agenda The Seventeenth Meeting of the ExTAG to be held In Christchurch, New Zealand 15th September 2015
-
17 August 2015
Draft Agenda The Seventeenth Meeting of the ExTAG to be held In Christchurch, New Zealand 15th September 2015
-
17 August 2015
Compilation of comments and observations on ExTAG/369/CD Bulbs used for other than current limiting resistance
-
17 August 2015
Compilation of comments on ExTAG/362/CD - Draft ExTAG Decision Sheet –Draft ExTAG Decision Sheet – Clarification on use of thermocouples.
-
17 August 2015
Report on ExTAG Task Group Amalgamation of Decision Sheets activities since the ExTAG The Hague meeting
-
17 August 2015
Compilation of comments on - ExTAG/368/CD ExTAG Draft Decision Sheet – Preparation of Flameproof, “dc”, and Enclosed-break, nC”, samples
-
17 August 2015
Compilation of comments on ExTAG/370/CD Draft ExTAG Decision Sheet – Software dependent semiconductor components
-
17 August 2015
Compilation of comments on - ExTAG/352A/CD Draft ExTAG Decision Sheet – Use of helical inserts as part of special fasteners in aluminium flameproof enclosures
-
17 August 2015
Compilation of comments on ExTAG/367/CD - Draft ExTAG Decision Sheet – Evaluation of relevant temperatures for EPL Da, Db and Dc
-
17 August 2015
Compilation of comments and observations on ExTAG/361/CD Draft ExTAG Decision Sheet – IECEx Certificates issued to show compliance with IEC TS 60079-40.
-
17 August 2015
Discussion paper – Use of TS Publications in the IECEx Certified Equipment Scheme
-
29 July 2015
Compilation of comments and observations on ExMC/353A/CD Draft ExTAG Decision Sheet – Flameproof joint for enclosure lid of non-cylindrical shape
-
27 July 2015
Draft Operational Document - IECEx Operational Document OD 202 Edition 1.0 - IECEx Proficiency Testing Program
-
20 July 2015
Draft ExTAG Decision Sheet – Securing of external plug and socket connections
-
31 August 2015
Draft ExTAG Decision Sheet – Scope exception regarding LED light sources
-
24 June 2015
Compilation of comments on - ExTAG/318B/CD ExTAG Draft Decision Sheet – Marking of Ex t equipment with and without layers of dust
-
04 June 2015
Compilation of comments on ExTAG/355/CD - Draft ExTAG Decision Sheet – Clarification on the applicability of terminal insulating material test. (Draft Decision Sheet withdrawn)
-
01 June 2015
Draft ExTAG Decision Sheet – Bulbs used for other than current limiting resistance
-
01 June 2015
Draft ExTAG Decision Sheet – Preparation of Flameproof, “dc”, and Enclosed-break, nC”, samples
-
17 August 2015
Draft ExTAG Decision Sheet – Evaluation of relevant temperatures for EPL Da, Db and Dc
-
19 May 2015
Draft Decision Sheet - Evaluation of relevant temperatures for EPL Da, Db and Dc
-
13 April 2015
Compilation of comments on ExTAG/353/CD - Draft ExTAG Decision Sheet – Flameproof joint for enclosure lid of non-cylindrical shape
-
20 August 2015
Draft ExTAG Decision Sheet – Terminal Boxes open to the interior of the motor
-
20 March 2015
Draft ExTAG Decision Sheet – Terminal Boxes open to the interior of the motor
-
19 March 2015
Compilation of comments and observations on ExTAG/352/CD Draft ExTAG Decision Sheet – Use of helical inserts as part of special fasteners in aluminium flameproof enclosures
-
18 March 2015
Draft ExTAG Decision Sheet – IECEx Certificates issued to show compliance with IEC TS 60079-40
-
18 August 2015
Compilation of comments and observations on ExTAG/350A/CD Draft ExTAG Decision Sheet - Brazing and welding of flameproof enclosures
-
03 March 2015
Compilation of comments and observations on ExTAG/350/CD Draft ExTAG Decision Sheet - Brazing and welding of flameproof enclosures
-
26 February 2015
Compilation of comments and observations on ExTAG/349/CD: Draft ExTAG Decision Sheet - Minimum degree of ingress protection for non-sparking plugs & sockets
-
12 February 2015
Compilation of comments and observations on ExTAG/345/CD: Draft ExTAG Decision Sheet – Regarding the application of faults as part of “ma” or “mb” evaluations, what are suitable faults that can be applied?
-
06 February 2015
Draft ExTAG Decision Sheet – Clarification on the applicability of terminal insulating material test.
-
02 February 2015
Compilation of comments and observations on ExTAG/336B/CD Draft ExTAG Decision Sheet – Clarification on the use of IEC 60079-14 within IECEx Certificates of Conformity
-
29 July 2015
Revision of ExTAG/353A/CD Draft ExTAG Decision Sheet – Flameproof joint for enclosure lid of non-cylindrical shape
-
13 April 2015
Revision of ExTAG/353/CD Draft ExTAG Decision Sheet – Flameproof joint for enclosure lid of non-cylindrical shape
-
21 December 2014
Draft ExTAG Decision Sheet – Flameproof joint for enclosure lid of non-cylindrical shape
-
19 March 2015
Draft ExTAG Decision Sheet – Use of helical inserts as part of special fasteners in aluminium flameproof enclosures
-
21 December 2014
Draft ExTAG Decision Sheet – Use of helical inserts as part of special fasteners in aluminium flameproof enclosures
-
02 December 2014
Compilation of comments on ExTAG/336A/CD Draft ExTAG Decision Sheet – Clarification on the use of IEC 60079-14 within IECEx Certificates of Conformity.
-
18 August 2015
Revision of ExTAG/350A/CD Draft ExTAG Decision Sheet - Brazing and welding of flameproof enclosures
-
03 March 2015
Draft ExTAG Decision Sheet - Brazing and welding of flameproof enclosures
-
24 November 2014
Draft ExTAG Decision Sheet - Brazing and welding of flameproof enclosures
-
20 November 2014
Draft ExTAG Decision Sheet - Minimum degree of ingress protection for non-sparking plugs & sockets
-
11 November 2014
Compilation of comments and observations on ExTAG/317/CD - Draft revision of ExTAG/299/CD – a revision of DS 2009/001A Method of test for measurement of capacitance of non-metallic enclosures
-
06 November 2014
Compilation of comments and observations on ExTAG/344/CD -: Draft Decision Sheet – Interpretation of IEC 60079-2 clause 7.3 to assist uniform interpretation
-
06 November 2014
Report of the Meeting of the ExTAG held In The Hague, The Netherlands, 26th August 2014
-
02 October 2014
Draft ExTAG Decision Sheet – Regarding the application of faults as part of “ma” or “mb” evaluations, what are suitable faults that can be applied?
-
11 September 2014
Draft Decision Sheet – Interpretation of IEC 60079-2 clause 7.3 to assist uniform interpretation
-
11 September 2014
Compilation of comments on ExTAG/323/CD – Draft revision of OD 010-1 Operational Document - Guidance for the development, compilation, issuing and receipt of ExTRs - Part 1: Development and posting of blank IECEx Test Report (ExTR) Documents.
-
15 July 2015
ExTAG Draft Decision Sheet Application of clause 9.2 Dielectric strength test of IEC 60079-18:20 (Withdrawn as result of discussions during the 2016 ExTAG Umhlanga Meeting)
-
12 August 2014
ExTAG Draft Decision Sheet Application of clause 9.2 Dielectric strength test of IEC 60079-18:2009
-
12 August 2014
ExTAG Draft Decision Sheet Application of clause 9.2 Dielectric strength test of IEC 60079-18:2009
-
31 July 2014
Compilation of comments on ExTAG/312/CD - Draft ExTAG Decision Sheet –“X” conditions of certification for non-sparking low power equipment
-
31 July 2014
Compilation of comments on ExTAG/311/CD Draft ExTAG Decision Sheet – Regarding the application of faults as part of “ma” or “mb” evaluations, what are suitable faults that can be applied?
-
12 August 2014
Compilation of comments and observations on ExTAG/318/CD -: Draft ExTAG Decision Sheet – Marking of Ex t equipment with and without layers of dust
-
02 December 2014
Draft ExTAG Decision Sheet – Clarification on the use of IEC 60079-14 within IECEx Certificates of Conformity
-
02 October 2014
Draft ExTAG Decision Sheet – Clarification on use of IEC 60079-14 within IECEx Certificates of Conformity
-
12 August 2014
Draft ExTAG Decision Sheet – Clarification on use of IEC 60079-14 within IECEx Certificates of Conformity
-
12 August 2014
Compilation of comments and observations on ExTAG/315/CD Draft ExTAG Decision Sheet – Applicability of Non-Electrical Equipment Standards to Ex Rotating Electrical Machines
-
30 July 2014
Compilation of comments on ExTAG/315/CD Draft ExTAG Decision Sheet – Applicability of Non-Electrical Equipment Standards to Ex Rotating Electrical Machines
-
17 August 2015
Compilation of comments on ExTAG/316A/CD Draft ExTAG Decision Sheet – Marking of Ex t equipment intended for installation partly in Zone 20 and partly in Zone 21
-
30 July 2014
Compilation of comments on ExTAG/316/CD Draft ExTAG Decision Sheet – Marking of Ex t equipment intended for installation partly in Zone 20 and partly in Zone 21
-
30 July 2014
Compilation of comments on ExTAG/317/CD - Draft revision of ExTAG/299/CD – a revision of DS 2009/001 Method of test for measurement of capacitance of non-metallic enclosures
-
12 August 2014
ExTAG/332/DA Draft Agenda The Sixteenth Meeting of the ExTAG to be held In The Hague, The Netherlands 26th August 2014
-
12 August 2014
Draft Decision Sheet – Treatment of Ex Components and Ex Equipment covered by Certificates issued to earlier editions of Standards and what Standards must be listed on page 2 of a new IECEx Certificate for an end-product incorporating these Ex Components, Ex Equipment, or both
-
04 August 2014
Report from ExTAG Working Group 01 (WG01): Preparation of assessment and test report forms (ExTRs)
-
25 July 2014
ExTAG Industry Discussion Request – Application of IEC 60079-0 Ed 6 2011 Section 16.6 “Selection of suitable cable”
-
18 July 2014
Draft revision of OD 010-1 Operational Document - Guidance for the development, compilation, issuing and receipt of ExTRs Part 1: Development and posting of blank IECEx Test Report (ExTR) Documents
-
18 July 2014
Draft OD034 - Operational Document - Guidance on the preparation of IECEx Equipment Certificates and Reports covering more than one identifiable item of equipment
-
18 July 2014
Draft OD034 - Operational Document - Guidance on the preparation of IECEx Equipment Certificates and Reports covering more than one identifiable item of equipment
-
14 July 2014
IECEx ExTAG and Assessor Training Workshop to be held Monday 25th August 2014
-
04 December 2014
Revision - Draft ExTAG Decision Sheet – ExTAG/318/CD Marking of Ex t equipment with and without layers of dust
-
12 August 2014
Revision - Draft ExTAG Decision Sheet – ExTAG/318/CD Marking of Ex t equipment with and without layers of dust
-
19 June 2014
Draft ExTAG Decision Sheet – Marking of Ex t equipment with and without layers of dust
-
04 December 2014
Draft revision of ExTAG/299/CD – a revision of DS 2009/001 Method of test for measurement of capacitance of non-metallic enclosures
-
12 June 2014
Draft revision of ExTAG/299/CD – a revision of DS 2009/001 Method of test for measurement of capacitance of non-metallic enclosures
-
17 August 2015
Draft ExTAG Decision Sheet – Marking of Ex t equipment intended for installation partly in Zone 20 and partly in Zone 21
-
11 June 2014
Draft ExTAG Decision Sheet – Marking of Ex t equipment intended for installation partly in Zone 20 and partly in Zone 21
-
30 April 2014
Draft ExTAG Decision Sheet – Applicability of Non-Electrical Equipment Standards to Ex Rotating Electrical Machines
-
17 April 2014
Compilation of comments on ExTAG/313/CD - Draft ExTAG Decision Sheet - Specification of RTI
-
31 January 2014
Draft ExTAG Decision Sheet –“X” conditions of certification for non-sparking low power equipment
-
31 January 2014
Draft ExTAG Decision Sheet – Regarding the application of faults as part of “ma” or “mb” evaluations, what are suitable faults that can be applied?
-
15 November 2013
Compilation of comments on ExTAG/307/CD - Draft Decision Sheet – Evaluation of stator windings & insulation system
-
15 November 2013
Revised Draft Decision Sheet – Evaluation of stator windings & insulation system
-
27 September 2013
Draft Decision Sheet – Evaluation of stator windings & insulation system
-
16 August 2013
ExTAG Industry Discussion Request received from ABB and VTT – Safety related devices for Ex p machines in IEC 60079-2 / section 7.2 and 7.3
-
08 August 2013
Nomination received from LCIE, France, for Mr. Julien Gauthier to be considered as ExTAG Secretary.
-
19 August 2013
Draft Agenda The Fifteenth Meeting of the ExTAG to be held In Fortaleza, Brazil 17th September 2013
-
06 September 2013
Draft Agenda The Fifteenth Meeting of the ExTAG to be held In Fortaleza, Brazil 17th September 2013
-
05 August 2013
ExTAG Industry Discussion Request received from SIMTARS, AU, – Review of ExTRs and QARs from overseas
-
31 July 2013
Draft ExTAG Decision Sheet –Draft revision of DS 2009/001 Method of test for measurement of capacitance of non-metallic enclosures
-
26 July 2013
The Implementation of ISO/IEC 17065 Conformity assessment -- Requirements for bodies certifying products, processes and services
-
26 July 2013
Summary of restructure and expansion of Rules of Procedure and Operational Documents supporting the expansion of the IECEx 03 Certified Service Facilities Scheme.
-
25 July 2013
Compilation of comments on ExTAG/243C/CD Draft ExTAG Decision Sheet – What Standards must be listed on page 2 of the IECEx Certificate?
-
25 July 2013
ExTAG Industry Discussion Request – Clarification on interpretation of IEC 80079-34:2011 clause 7.5.3 (i).
-
23 July 2013
Draft Decision Sheet – Treatment of Ex Components covered by Certificates issued to older editions of Standards
-
19 July 2013
Compilation of comments on ExTAG/286/CD -Draft Decision Sheet – Production control of non-metallic seal material for sealed devices
-
21 June 2013
Compilation of comments on ExTAG/285/CD - Draft Decision Sheet – Series of Devices consisting of both “components” and “equipment”
-
19 June 2013
Compilation of comments on ExTAG/285/CD - Draft Decision Sheet – Series of Devices consisting of both “components” and “equipment”
-
19 June 2013
Compilation of comments on ExTAG/278A/CD - Draft Decision Sheet – Recommendation to improve the effectiveness of the determination of explosion pressure
-
18 June 2013
Compilation of comments on ExTAG/279A/CD -Draft Decision Sheet – Recommendations for performing spark ignition tests with spark test apparatus (STA)
-
06 May 2013
Compilation of comments on ExTAG/278/CD -Draft Decision Sheet – Recommendation to improve the effectiveness of the determination of explosion pressure
-
01 May 2013
Draft Decision Sheet – Production control of non-metallic seal material for Sealed devices
-
01 May 2013
Draft Decision Sheet – Series of Devices consisting of both “components” and “equipment”
-
11 April 2013
Compilation of comments on ExTAG/279/CD - Draft Decision Sheet – Recommendations for performing spark ignition tests with spark test apparatus (STA)
-
06 February 2013
Compilation of comments on ExTAG/276A/CD Draft ExTAG Decision Sheet – Temperature measurement of cable entries on electrical machines
-
11 December 2012
Request for information from IECEx ExTLs relating to “Temperature Testing under Dust Layers”
-
11 April 2013
Draft Decision Sheet – Recommendations for performing spark ignition tests with spark test apparatus (STA)
-
11 December 2012
Draft Decision Sheet – Recommendations for performing spark ignition tests with spark test apparatus (STA)
-
30 May 2013
Draft Decision Sheet – Recommendation to improve the effectiveness of the determination of explosion pressure
-
11 December 2012
Draft Decision Sheet – Recommendation to improve the effectiveness of the determination of explosion pressure
-
11 December 2012
Compilation of comments on - Draft ExTAG Decision Sheet – ExTAG/276/CD Temperature measurement of cable entries on electrical machines
-
11 December 2012
Draft ExTAG Decision Sheet – Temperature measurement of cable entries on electrical machines
-
10 October 2012
Draft Decision Sheet - Draft ExTAG Decision Sheet – Temperature measurement of cable entries on electrical machines
-
24 August 2012
Compilation of comments on ExTAG/246/CD Draft ExTAG Decision Sheet – Consideration of Faults on ICs/ ASICs to Cl. 7.6d (2nd bullet) of IEC 60079-11 Ed 6?
-
23 August 2012
Compilation of comments on ExTAG/262/CD Draft Decision Sheet – FLAME RETARDANCE TESTING
-
22 August 2012
Compilation of comments on ExTAG/261/CD Draft Decision Sheet - Types of protection that are only part of supplier provided devices
-
20 August 2012
Report from ExTAG Working Group 01 (WG01): Preparation of assessment and test report forms (ExTRs)
-
15 August 2012
Compilation of comments and observations on ExTAG/259/CD Draft Decision Sheet - Inclusion of an IP rating as part of the marking and certificate
-
06 August 2012
Proposal from MSTC concerning rating issue of Zener diodes used as safety components in intrinsically safe protected circuits.
-
25 July 2012
Draft Agenda The Fourteenth Meeting of the ExTAG to be held in Calgary Canada 4th September 2012
-
25 July 2012
Draft Agenda The Fourteenth Meeting of the ExTAG to be held in Calgary Canada 4th September 2012
-
25 July 2012
Draft ExTAG Decision Sheet –Draft revision of DS 2006/002 Ex equipment where the equipment includes unspecified IECEx certified components
-
20 July 2012
Compilation of comments on ExTAG/257/CD Draft Decision Sheet - Medium for Documenting Required Instructions
-
09 July 2012
Compilation of comments on ExTAG/243A/CD Draft ExTAG Decision Sheet – What Standards must be listed on page 2 of the IECEx Certificate?
-
18 June 2012
Draft Decision Sheet - Types of protection that are only part of supplier provided devices
-
24 May 2012
Compilation of comments on ExTAG/256/CD Draft ExTAG Decision Sheet - Group Verification Requirements for Flameproof Castings
-
11 May 2012
Draft Decision Sheet - Inclusion of an IP rating as part of the marking and certificate
-
03 May 2012
Compilation of comments on ExTAG/252/CD Draft ExTAG Decision Sheet - Dust Testing for IP5X and 6x.
-
03 April 2012
Draft Decision Sheet -. Group Verification Requirements for Flameproof Castings
-
02 April 2012
Compilation of comments on ExTAG/249/CD Draft Decision Sheet – Interpretation of sub-clause 17.4 Radial air gap of IEC60079-15 Ed. 3 (2005)
-
26 March 2012
Compilation of comments on ExTAG/243/CD Draft ExTAG Decision Sheet – What Standards must be listed on page 2 of the IECEx Certificate?
-
26 March 2012
Compilation of comments on ExTAG/196C/CD Draft ExTAG Draft Decision Sheet - A decision is required from the IECEx to confirm or negate the locked rotor test as a mandatory requirement in IEC 60079-19.
-
01 March 2012
Compilation of comments on ExTAG/242/CD Draft ExTAG Decision Sheet – Avoidance of a build-up of electrostatic charge: IEC 60079-0
-
15 February 2012
Draft ExTAG Decision Sheet – Interpretation of sub-clause 17.4 Radial air gap of IEC60079-15 Ed. 3 (2005)
-
14 February 2012
Compilation of comments on ExTAG/196B/CD Draft Decision Sheet - A decision is required from the IECEx to confirm or negate the locked rotor test as a mandatory requirement in IEC 60079-19.
-
24 January 2012
Draft ExTAG Decision Sheet – Consideration of Faults on ICs/ ASICs to Cl. 7.6d (2nd bullet) of IEC 60079-11 Ed 6?
-
23 August 2018
IECEx On-Line QAR Management System: ExCBs-QARs out of date and ExCBs-CoCs with QARs out of date.
-
21 December 2011
IECEx On-Line Website Update: ExCBs-QARs out of date and ExCBs-CoCs with QARs out of date
-
01 December 2011
Compilation of comments on ExTAG/241/CD Draft ExTAG Decision Sheet – Revision of ExTAG DS 2006/003 Galvanically separating components
-
25 July 2013
Draft ExTAG Decision Sheet – What Standards must be listed on page 2 of the IECEx Certificate?
-
12 April 2013
Draft ExTAG Decision Sheet – What Standards must be listed on page 2 of the IECEx Certificate?
-
09 July 2012
Draft ExTAG Decision Sheet – What Standards must be listed on page 2 of the IECEx Certificate?
-
26 March 2012
Draft ExTAG Decision Sheet – What Standards must be listed on page 2 of the IECEx Certificate?
-
24 November 2011
Draft ExTAG Decision Sheet – What Standards must be listed on page 2 of the IECEx Certificate?
-
21 November 2011
Draft ExTAG Decision Sheet – Avoidance of a build-up of electrostatic charge: IEC 60079-0
-
26 September 2011
Draft ExTAG Decision Sheet – Revision of ExTAG DS 2006/003 Galvanically separating components
-
08 September 2011
Draft ExTAG Decision Sheet – Revision of ExTAG DS 2006/009 Assessment of an OEM Service facility
-
19 August 2011
Report from ExTAG Working Group 01 (WG01): Preparation of assessment and test report forms (ExTRs)
-
16 August 2011
ExTAG Industry Discussion Request – Repair and rewinding of ‘Ex’ rated motors by Certified Service Provider under the IECEx Scheme.
-
24 August 2011
Report from Dr Uwe Klausmeyer, Convenor ExTAG WG 10, Proficiency Testing
-
09 August 2011
Compilation of comments on ExTAG/215/CD Draft revised ExTAG Decision Sheet – ExTAG 2010/007- Sealing test of cable glands
-
05 August 2011
Draft new Operational Document for the implementation of IEC 60079-33 (Ex s)
-
24 August 2011
Draft Agenda The Thirteenth Meeting of the ExTAG to be held In Split, Croatia 6th September 201
-
19 August 2011
Draft Agenda The Thirteenth Meeting of the ExTAG to be held In Split, Croatia 6th September 2011
-
16 August 2011
Draft Agenda The Thirteenth Meeting of the ExTAG to be held In Split, Croatia 6th September 2011
-
09 August 2011
Draft Agenda The Thirteenth Meeting of the ExTAG to be held In Split, Croatia 6th September 2011
-
05 August 2011
IECEx Draft Operational Document OD 017 Edition 4 – Drawing and Documentation Guidance for IEC Ex Certification – for use by Manufacturers and ExTLS
-
05 August 2011
Report from WG3 – OD017 - Drawing and Documentation Guidance for IEC Ex Certification – for use by Manufacturers and ExTLS - Activity .
-
04 August 2011
Draft OD 010-2 – Guidance for the Compilation, Issuance and Receipt of IECEx Test Report (ExTR) Packages
-
04 August 2011
Draft OD 010-1 - Guidance for the Development and Posting of Blank IECEx Test Report (ExTR) Documents
-
19 July 2011
NOTICE TO ExTLS and ExCBs - New Edition of IEC 60079-0 and ExTAG DS 2010/006A
-
12 July 2011
Compilation of Comments received on ExTAG/222/CD – Draft ExTAG Decision Sheet – Continued conformity of plastic and elastomeric materials
-
30 June 2011
Compilation of Comments on ExTAG/219/CD– Draft ExTAG Decision Sheet – Revision of ExTAG DS 2010/006 – Dated references to IEC 60079-0 in specific protection technique parts of the IEC 60079 series
-
31 May 2011
Draft ExTAG Decision Sheet – Continued conformity of plastic and elastomeric materials
-
03 May 2011
Draft ExTAG Decision Sheet – Revision of ExTAG DS 2010/006 – Dated references to IEC 60079-0 in specific protection technique parts of the IEC 60079 series
-
24 August 2011
Compilation of Comments on Draft ExTAG/217/CD- Decision Sheet – Revision of ExTAG DS 2004/006A – What procedures should be followed for manufacturers that are seeking an ExTR (and subsequent IECEx Certificate of Conformity, CoC) on an end-product that includes Ex components not covered by an ExTR and manufactured by another manufacturer?
-
07 April 2011
Compilation of Comments on ExATG/217/CD - Draft ExTAG Decision Sheet – Revision of ExTAG DS 2004/006A
-
18 January 2011
Compilation of comments on ExTAG/213/CD - Draft ExTAG Decision – Determining compliance with winding requirements for enamelling
-
14 January 2011
Draft revised ExTAG Decision Sheet –ExTAG 2010/007- Sealing test of cable glands
-
22 November 2010
Declaration Form for document ExTAG/214/Inf – IECEx Unit Verification Certification.
-
22 November 2010
Draft ExTAG Decision - Determining compliance with winding requirements for enameling.
-
05 August 2011
Compilation of observations of the WG3 Convener on comments received for ExTAG/193/CD
-
16 August 2010
Compilation of comments on ExTAG/193/CD IECEx Draft Operational Document OD 017 Edition 4 – Drawing and Documentation Guidance for IEC Ex Certification – for use by Manufacturers and ExTLS.
-
04 August 2010
IECEx ExTAG Training Workshop to be held in Berlin, Monday 30th August 2010.
-
03 August 2010
Compilation of comments and observations on ExTAG/194/CD Draft Decision Sheet - Dated references to IEC 60079- 0 in specific protection technique parts of the IEC 60079 series
-
03 August 2010
Compilation of comments on ExTAG/194/CD Draft Decision Sheet - Dated references to IEC 60079- 0 in specific protection technique parts of the IEC 60079 series
-
09 August 2010
Topic for discussion - IECEx Test Report (ExTRs) Documents covering partial testing (Revision OD 010)
-
16 August 2010
Compilation of comments and observations on ExTAG/192/CD IECEx Draft Operational Document OD 010 Edition 2 - Guidance for Developing New or Revised IECEx Test Report (ExTR) Documents and for Issuing and Receiving Existing IECEx Test Report (ExTR) Documents
-
03 August 2010
Compilation of comments on ExTAG/192/CD IECEx Draft Operational Document OD 010 Edition 2 - Guidance for Developing New or Revised IECEx Test Report (ExTR) Documents and for Issuing and Receiving Existing IECEx Test Report (ExTR) Documents
-
20 August 2010
The Twelfth Meeting of the ExTAG to be held In Berlin, Germany 31st August 2010 Draft Agenda
-
16 August 2010
The Twelfth Meeting of the ExTAG to be held In Berlin, Germany 31st August 2010 Draft Agenda
-
29 July 2010
The Twelfth Meeting of the ExTAG to be held In Berlin, Germany 31st August 2010 Draft Agenda
-
26 October 2010
ExTAG Draft Decision Sheet Application of clause 10.10 transformer tests of IEC 60079-11:2006
-
29 July 2010
ExTAG Draft Decision Sheet Application of clause 10.10 transformer tests of IEC 60079-11:2006
-
28 July 2010
Compilation of comments on ExTAG/196/CD Draft Decision Sheet - A decision is required from the IECEx to confirm or negate the locked rotor test as a mandatory requirement in IEC 60079-19.
-
27 July 2010
Annex A to Draft OD 024 (ExTAG/186A/CD) WITNESSED TESTING SITE ASSESSMENT CHECKLIST
-
27 July 2010
Compilation of Comments on ExTAG/186/CD – Draft IECEx OD 024 - IECEx Rules of Procedure covering testing, or witnessing testing at a manufacturer’s or user’s facility
-
23 July 2010
ExTAG Industry Discussion Request – Repair and rewinding of ‘Ex’ rated motors by Certified Service Provider under the IECEx Scheme
-
22 July 2010
Compilation of Comments ExTAG/195/CD Draft Decision Sheet - Mechanical Security of Soldered Connections
-
22 July 2010
Compilation of Comments ExTAG/195/CD Draft Decision Sheet - Mechanical Security of Soldered Connections
-
06 July 2010
Compilation of Comments on ExTAG/160/CD - Draft Decision Sheet - Sealing test of cable glands - IEC 60079-1 6th Edition 2007
-
14 February 2012
Draft Decision Sheet - A decision is required from the IECEx to confirm or negate the locked rotor test as a mandatory requirement in IEC 60079-19
-
08 September 2011
Draft Decision Sheet - A decision is required from the IECEx to confirm or negate the locked rotor test as a mandatory requirement in IEC 60079-19.
-
05 August 2011
Draft Decision Sheet - A decision is required from the IECEx to confirm or negate the locked rotor test as a mandatory requirement in IEC 60079-19.
-
14 February 2012
Draft Decision Sheet - A decision is required from the IECEx to confirm or negate the locked rotor test as a mandatory requirement in IEC 60079-19.
-
18 May 2010
IECEx Draft Decision Sheet - Dated references to IEC 60079- 0 in specific protection technique parts of the IEC 60079 series
-
23 April 2010
IECEx Draft Operational Document OD 017 Edition 4 – Drawing and Documentation Guidance for IEC Ex Certification – for use by Manufacturers and ExTLS
-
16 August 2010
Revised IECEx Draft Operational Document OD 010 Edition 2 - Guidance for Developing New or Revised IECEx Test Report (ExTR) Documents and for Issuing and Receiving Existing IECEx Test Report (ExTR) Documents
-
25 March 2010
IECEx Draft Operational Document OD 010 Edition 2 - Guidance for Developing New or Revised IECEx Test Report (ExTR) Documents and for Issuing and Receiving Existing IECEx Test Report (ExTR) Documents
-
17 March 2010
Compilation of Comments received concerning document- ExTAG/183/CD –Draft Decision Sheet - Measurement of Pressure Rise Time in relation to determination if Pressure Piling has occurred
-
17 March 2010
Compilation of Comments on ExTAG/185/CD Draft Decision Sheet - Spigot joints
-
18 February 2010
Compilation of Comments on ExTAG/182/CD - Draft Decision Sheet - Test Procedures for Breathing and Draining Devices
-
12 February 2010
Compilation of Comments on ExTAG/181A/CD - Draft decision Sheet - Voltage values in determination of creepage and clearance distances
-
27 July 2010
Draft IECEx OD 024 - IECEx Rules of Procedure covering testing, or witnessing testing at a manufacturer’s or user’s facility
-
17 February 2010
Draft IECEx OD 024 Version 04 - IECEx Rules of Procedure covering testing, or witnessing testing at a manufacturer’s or user’s facility
-
24 December 2009
Compilation of Comments on ExTAG/181/CD - Draft decision Sheet - Voltage values in determination of creepage and clearance distances
-
17 March 2010
Revised Draft Decision Sheet - Measurement of Pressure Rise Time in relation to determination if Pressure Piling has occurred
-
18 November 2009
Draft Decision Sheet - Measurement of Pressure Rise Time in relation to determination if Pressure Piling has occurred
-
18 November 2009
Draft Decision Sheet - Test Procedures for Breathing and Draining Devices
-
24 December 2009
Draft decision Sheet - Voltage values in determination of creepage and clearance distances
-
30 October 2009
Draft decision Sheet - Voltage values in determination of creepage and clearance distances
-
31 July 2009
BASEEFA comments to ExTAG/145B/CD Revision to ExTAG DS2006/002– To Consider the Acceptance of Certain Types of Unspecified Ex Certified Components for Incorporating into Flameproof Ex Equipment
-
29 July 2009
Annex A - WITNESSED TESTING SITE ASSESSMENT CHECKLIST Draft Operational Document IECEx OD 024 Version 03/Toronto
-
29 July 2009
Draft Operational Document IECEx OD 024 Version 03/Toronto IECEx Rules of Procedure covering testing, or witnessing testing at a manufacturer’s or user’s facility
-
30 July 2009
IECEx ExTAG Training Workshop to be held in Melbourne, Monday 31st August 2009
-
24 August 2009
Compilation of Comments ExTAG/165/CD Draft Decision Sheet – Sealing requirements and terminology of cable glands
-
30 July 2009
Compilation of Comments on ExTAG/136A/CD – revision of ExTAG Decision Sheet DS 2004/006 - ExTAG Decision Sheets / Procedures for use of components on end products not covered by an ExTR
-
24 August 2009
Draft Agenda the Eleventh Meeting of the ExTAG to be held In Melbourne, Australia 1st September 2009
-
10 August 2009
Draft Agenda the Eleventh Meeting of the ExTAG to be held In Melbourne, Australia 1st September 2009
-
04 August 2009
Draft Agenda the Eleventh Meeting of the ExTAG to be held In Melbourne, Australia 1st September 2009
-
24 July 2009
Draft Agenda the Eleventh Meeting of the ExTAG to be held In Melbourne, Australia 1st September 2009
-
29 July 2009
Report from ExTAG WG 06 - IECEx Rules of Procedure covering testing, or witnessing testing at a manufacturer’s or user’s facility Draft OD 024/V03/Toronto
-
24 August 2009
Activity Report WG3 – OD017 - Drawing and Documentation Guidance for IEC Ex Certification – for use by Manufacturers and ExTLS
-
22 July 2009
Compilation of Comments ExTAG/158/CD Draft Decision Sheet – Questionnaire relating to – Standard IEC 60079-7 Edition 4 clauses 4.2.2.5 and 4.2.3.3 Mechanical Security of Soldered Connections
-
21 July 2009
ExTAG Industry Discussion Request – Repair and rewinding of ‘Ex’ rated motors by Certified Service Provider under the IECEx Scheme
-
14 July 2009
Draft Decision Sheet – Sealing requirements and terminology of cable glands
-
09 July 2009
Scheduling of Surveillance Assessments + Re-Assessments for the IECEx 02 Certified Equipment Scheme.
-
06 July 2009
Compilation of comments on ExTAG/155/CD - Draft Decision Sheet - Method of test for measurement of capacitance of non-metallic enclosures
-
06 July 2010
Revised Draft Decision Sheet - Sealing test of cable glands - IEC 60079-1 6th Edition 2007
-
04 June 2009
Draft Decision Sheet - Sealing test of cable glands - IEC 60079-1 6th Edition 2007
-
13 January 2009
Draft-Decision-Sheet-MOT-measurement-capacitance-non-metallic-enclosures
-
28 August 2008
Secretariat’s Review of the On-Line Certificate of Conformity System - Linkage of issued IECEx Certificates of Conformity to Draft ExTRs and Draft QARs.
-
04 August 2010
Revision of ExTAG/136B/CD – revision of ExTAG Decision Sheet DS 2004/006 - ExTAG Decision Sheets / Procedures for use of components on end products not covered by an ExTR
-
06 July 2010
Revision of ExTAG/136A/CD – revision of ExTAG Decision Sheet DS 2004/006 - ExTAG Decision Sheets / Procedures for use of components on end products not covered by an ExTR
-
24 August 2009
Revised Draft Decision Sheet - Totality of equipment to be suitable for hazardous area installation when issuing IECEx certificates
