|
|
Zipfile of meeting documents
(extract all documents before opening agenda - ExTAG/138C/DA) |
|
|
|
ExTAG Training Workshop
Monday 29th September 2008 |
|
Agenda Item number |
Document number |
Title |
|
|
ExTAG/139/Inf |
IECEx ExTAG
Training Workshop to be held in Paris,
Monday 29th
September 2008 |
|
|
ExTAG/147/Inf |
Secretariat’s Review of the
On-Line Certificate of Conformity System - Linkage of issued
IECEx Certificates of Conformity to Draft ExTRs and Draft
QARs. |
|
|
|
|
|
ExTAG Technical Meeting
Tuesday 30th September 2008 |
|
|
ExTAG/138C/DA
|
Draft Agenda the Tenth Meeting
of the ExTAG to be held in Paris, France, 30th September
2008 (earlier
versions of the Draft Agenda are available on the
ExTAG Documents
page) |
|
|
|
|
|
3 |
ExTAG/127A/RM |
Confirmed Minutes the Ninth
Meeting of the ExTAG – Denver USA |
|
10.2.4 |
ExTAG/130/CD |
Draft Decision Sheet -
Totality of equipment to be suitable for hazardous area
installation when issuing IECEx certificates |
|
9.11 |
ExTAG/132/CD |
Equipment for gas
and dust explosive atmospheres –
Special
protection “s” |
|
10.2.4 |
ExTAG/133A/CC |
Compilation of Comments
received concerning document: ExTAG/130/CD: –Totality of
equipment to be suitable for hazardous area installation
when issuing IECEx certificates |
|
9.6 |
ExTAG/135/CD |
Draft Ex/OD012/Version 2 - ExTAG Guide for
Application of Uncertainty of Measurement to conformity for
laboratory tests carried out under the IECEx Scheme |
|
10.2.1 |
ExTAG/136/CD |
Revision of ExTAG Decision Sheet DS 2004/006 |
|
10.2.2 |
ExTAG/137/CD |
Revision of ExTAG Decision Sheet DS 2006/002 |
| 4.2 |
ExTAG/139/Inf |
IECEx ExTAG Training Workshop
to be held in Paris, Monday 29th September 2008 |
| 10.3 |
ExTAG/140/CD |
Lack of an Authoritative Source for “Manufacturer’s
Documents” |
| 9.2 |
ExTAG/141/R |
ExTAG Ad Hoc WG02 Report
Good working practices for IECEx Working Groups |
| 12 |
ExTAG/142/CD |
ExTAG Industry Discussion Request – Group 1 Mining |
| 10.2.4 |
ExTAG/143A/CD
|
Updated version of the Initial response from TC 31
Maintenance Team regarding the IEC Standard IEC62013
Caplights and EXTAG documents ExTAG/130/CD and ExTAG/133/CC |
| 10.1.1 |
ExTAG/144/Inf |
A list of ExTAG Decision
Sheets approved since the Denver 2007 Meetings |
| 10.2.2 |
ExTAG/145A/CD |
ExTAG Industry Discussion
Request – Unspecified Ex Certified |
| 9.12 |
ExTAG/146/R |
Report from Dr Uwe Klausmeyer,
Convenor ExTAG WG 10, Proficiency Testing |
| |
ExTAG/147/Inf |
Secretariat’s Review of the
On-Line Certificate of Conformity System - Linkage of issued
IECEx Certificates of Conformity to Draft ExTRs and Draft
QARs. |
| 10.2.3 |
ExTAG/148/CD |
ExTAG Draft Decision Sheet
Application of clause 7.5.3 for series limiting components
for voltage limitation of IEC 60079-11 |
| 12.2 |
ExTAG/149/CD |
Conformity Assessment of
Material’s Physical Properties |
| 9.5 |
ExTAG/150/R |
Report from Convenor WG3 – OD017, Drawing and Documentation
Guidance for IEC Ex Certification - Activity Report 2008 |
| |
|
|
| 16 |
ExMC/436/Inf |
Nomination for consideration
as IECEx Chairman “Nomination from the United States of
America - Mr Kerry McManama”
|
| 6.2 |
ExMC/460/CD |
Draft OD 003 Part 2:
Procedures for the assessment, surveillance assessment and
reassessment of ExCBs and ExTLs (Draft Revision OD 003
Version 1) prepared by Mr Jim Munro, Chairman of Panel of
Assessors |
| 18 |
ExMC/474/Inf |
ISO and IAF announce schedule
for implementation of accredited certification to ISO
9001:2008 |
| 9.6 |
IEC
GUIDE 115 |
Application of uncertainty of
measurement to conformity assessment activities in the
electrotechnical sector |
| |
|
|
| 9.5 |
OD 017/V3 |
Drawing and Documentation
Guidance for IEC Ex Certification and ExTLS |
| 11 |
OD 019/V4
|
IECEx Participation and Scheme
Fees |
| 9.10 |
OD 021/V2 |
Guidance document for the
Assessment of I.S systems and equipment |
| 9.2 |
OD 031/V1 |
Guide for Good Working
Practices for the Management of IECEx Scheme Working Groups. |
| |
|
|
| 10.1.2 |
DS 2003/01 |
IEC 60079-11 Limitation of RF
power Status of document: draft |
| 10.1.2 |
DS
2003/02 |
ExTAG decisions and
recommendations: Proposal for a procedure to generate,
discuss and finalise them |
| 10.1.2 |
DS
2003/003 |
Assessment of infallible safety shunt
assemblies |
| 12.2 |
DS 2008/002 |
CTI Testing |
| 12.2 |
DS
2008/004 |
Acceptance of test data |
| |
|
|
| |
|
|
