The IECEx System is based on the use of specific international
IEC Standards for type of protection of Ex equipment. These IECEx
Standards are listed below and are available for secure purchase
online. To purchase these documents, your browser needs to support
JavaScript and secure HTTP.
| Number |
Title |
|
60079-0 |
Explosive atmospheres -
Part 0: Equipment - General requirements |
|
60079-1 |
Explosive atmospheres -
Part 1: Equipment protection by
flameproof enclosures 'd' |
|
60079-2 |
Explosive atmospheres -
Part 2: Equipment
protection by pressurized enclosures 'p' |
|
60079-5 |
Explosive atmospheres -
Part 5: Equipment
protection by powder filling 'q' |
|
60079-6 |
Explosive atmospheres -
Part 6: Equipment
protection by oil immersion 'o' |
|
60079-7 |
Explosive atmospheres -
Part 7: Equipment
protection by increased safety 'e' |
|
60079-11 |
Explosive atmospheres -
Part 11: Equipment
protection by intrinsic safety 'i' |
|
60079-15 |
Electrical apparatus for explosive gas
atmospheres -
Part 15: Construction, test and marking of type of
protection 'n' electrical apparatus |
|
60079-18 |
Electrical apparatus for explosive gas
atmospheres -
Part 18: Construction, test and marking of type of
protection encapsulation 'm' electrical apparatus |
|
60079-19 |
Explosive atmospheres -
Part 19: Equipment
repair, overhaul and reclamation |
|
60079-25 |
Electrical apparatus for explosive gas
atmospheres -
Part 25: Intrinsically safe systems |
| 60079-26 |
Explosive atmospheres -
Part 26: Equipment with equipment
protection level (EPL) Ga
|
|
60079-27 |
Explosive atmospheres -
Part 27: Fieldbus
intrinsically safe concept (FISCO) |
|
60079-28 |
Explosive atmospheres -
Part 28: Protection
of equipment and transmission systems using optical radiation |
|
60079-29-1 |
Explosive atmospheres -
Part 29-1: Gas
detectors - Performance requirements of detectors for flammable
gases |
|
60079-29-2 |
Explosive atmospheres
-
Part 29-2: Gas
detectors - Selection, installation, use and maintenance of
detectors for flammable gases and oxygen |
|
60079-30-1 |
Explosive atmospheres -
Part 30-1:
Electrical resistance trace heating - General and testing
requirements |
|
60079-31 |
Explosive atmospheres –
Part 31: Equipment dust ignition protection by enclosure 't' |
|
61241-0 |
Electrical apparatus for use in the
presence of combustible dust -
Part 0: General requirements |
|
61241-1 |
Electrical apparatus for use in the
presence of combustible dust -
Part 1: Protection by enclosures
'tD' |
|
61241-1-1 |
Electrical apparatus for use in the
presence of combustible dust -
Part 1: Electrical apparatus
protected by enclosures and surface temperature limitation -
Specification for apparatus |
|
61241-4 |
Electrical apparatus for use in the
presence of combustible dust -
Part 4: Type of protection 'pD' |
|
61241-11 |
Electrical apparatus for use in the presence of combustible
dust -
Part 11: Protection by intrinsic safety 'iD' |
|
61241-18 |
Electrical apparatus for use in the
presence of combustible dust -
Part 18: Protection by
encapsulation 'mD' |
|
61779-1 |
Electrical apparatus for the detection and
measurement of flammable gases -
Part 1: General requirements
and test methods |
|
61779-2 |
Electrical apparatus for the detection and
measurement of flammable gases -
Part 2: Performance
requirements for group I apparatus indicating a volume fraction
up to 5% methane in air |
|
61779-3 |
Electrical apparatus for the detection and
measurement of flammable gases -
Part 3: Performance
requirements for group I apparatus indicating a volume fraction
up to 100% methane in air |
|
61779-4 |
Electrical apparatus for the detection amd
measurement of flammable gases -
Part 4: Performance
requirements for group II apparatus indicating a volume fraction
up to 100% lower explosive limit |
|
61779-5 |
Electrical apparatus for the detection and
measurement of flammable gases -
Part 5: Performance
requirements for group II apparatus indicating a volume fraction
up to 100% gas |
|
62013-1 |
Caplights for use in mines susceptible to
firedamp -
Part 1: General requirements - Construction and
testing in relation to the risk of explosion |
|
62013-2 |
Caplights for use in mines susceptible to firedamp -
Part 2:
Performance and other safety-related matters |
|
62086-1 |
Electrical apparatus for explosive gas
atmospheres –
Electrical resistance trace heating – Part 1: General and
testing requirements
|