The following are the official and current versions of IECEx Test
Reports (formerly IECEx Assessment and Test Report (ATR)) blank forms
for use by IECEx Accepted Certification
Bodies and Ex Test Laboratories.
They are available for download in MS Word format. Minor variations
in pagination may occur due to MS Word reformatting for your local
printer.
has resulted in changes to some terminology, “IECEx Accepted
Certification Bodies (ACBs)” are now called “IECEx Certification
Bodies (ExCBs)” and “IECEx Assessment and Test Report
(ATR)” are now called “IECEx Test Report (ExTR)”.
As new versions of the ExTRs become available the terminology will
be changed accordingly.
| |
|
Blank ExTR Test Report
Template |
This Blank Ex Test Report template is to be used by ExTLs
and ExCBs when creating new or revised Ex Test Reports blank
for submission to ExTAG WG1 Convenor for approval as an
official ExTR form. (Posted 100820) |
|
ExTR
Cover Sheet |
For use with all IECEx ExTRs.
(Revised and posted 101216)
This
document is to be compiled and reviewed by the ExTL, with
the ExCB giving the final approval, or compiled by the ExCB
without the involvement of the ExTL. It is to serve as the
sole cover for an ExTR package, which may be comprised of a
single ExTR document or multiple ExTR documents. This ExTR
Cover is to be completed and attached to the completed ExTR
package.
|
|
IECEx
Ex Test Report Addendum |
For use with all IECEx ExTRs.
(Revised and posted 100820)
This
ExTR Addendum is to be compiled and reviewed by the ExTL.
The Addendum is to supplement an already issued Ex Test
Report and is to be accompanied by a single ExTR Cover
Sheet, which is to be approved by the ExCB. Only those
clauses applicable to the supplemental issue being addressed
are to be tabulated and remarked upon as part of this
document. ExTR Report of National Differences may also
supplement this ExTR Addendum. |
|
IECEx
Test Report National Differences |
For use with all IECEx ExTRs.
(Revised and posted 100820)
This
Ex Test Report of National Differences is to be compiled and
reviewed by the ExTL. This document is to supplement an Ex
Test Report or ExTR Addendum, with a separate such document
issued for each intended country / region. All National
Differences of the intended country / region are to be
tabulated and remarked upon as part of this document. |
|
ECEx TEST REPORT of PARTIAL TESTING
Posted to web 110804 |
An ExTR of Partial Testing
provides a clause-by-clause documentation of the initial
evaluation and testing that verified compliance of an item
or product with only select requirements from an IEC Ex
standard. This ExTR of Partial Testing is part of an ExTR
package that may include other Ex Test Report, Addendum and
National Differences documents, along with a single ExTR
Cover. An ExTR of Partial Testing is to be compiled and
reviewed by the ExTL. The Issuing ExCB indicates final
approval of the ExTR of Partial Testing as part of the
overall ExTR package on the associated ExTR Cover.
|
|
|
|
ExTRs for IEC 60079- 0 |
|
ExTR Number |
Title |
60079-0:1983
2nd ed.(ver.1a)
Amendments:
1 : 1987-02
2 : 1991-10 |
Electrical apparatus for explosive
gas atmospheres
Part 0: General requirements |
60079-0:1998
3rd ed.(ver.2a)
Amendments:
None |
Electrical apparatus for explosive
gas atmospheres
Part 0: General requirements |
60079-0:2000
3.1 ed.(ver.3a)
Amendments:
None |
Electrical apparatus for explosive
gas atmospheres
Part 0: General requirements |
60079-0: 4th ed.(ver.4J)
Posted to web 110923 |
Electrical apparatus for explosive gas atmospheres Part 0:
General requirements
(This ExTR blank document
is a modified version of TRF No. ExTR60079-0_4F. This modified
version is [1] only for use with ExTR60079-11_5B-1, and [2] only
for the evaluation of intrinsically safe equipment when Annex F
is applied.) |
60079-0: 4th ed.(ver.4I)
Posted to web 110923
|
Electrical apparatus for explosive gas atmospheres Part 0:
General requirements
(This ExTR blank document
is a modified version of TRF No. ExTR60079-0_4F. This modified
version is [1] only for use with ExTR60079-11_5B-1, and [2] only
for the evaluation of intrinsically safe equipment when Annex F
is not applied.)
|
60079-0: 4th ed.(ver.4H)
Posted to web 110923
|
Electrical apparatus for explosive gas atmospheres Part 0:
General requirements
(This ExTR blank document
is a modified version of TRF No. ExTR60079-0_4F. This modified
version is [1] only for use with ExTR60079-11_5B-1, and [2] only
for the evaluation of associated apparatus when Annex F is
applied.
|
|
60079-0:4th ed.
(Ver.4G)
Posted to web 110923
|
Electrical apparatus for explosive gas atmospheres
Part 0: General requirements
(This ExTR blank document is a modified version of TRF No.
ExTR60079-0_4F. This modified version is [1] only for use with
ExTR60079-11_5B-1, and [2] only for the evaluation of associated
apparatus when Annex F is not applied.)
|
|
60079-0:4th
ed. (Ver.4F)
Posted to web 110923 |
Electrical apparatus for explosive gas atmospheres
Part 0: General requirements
|
|
60079-0:2007 5th ed. (ver. 5D)
Posted to web 110817 |
Explosive
atmospheres – Part 0: Equipment – General requirements
|
|
60079-0:2011
6th ed. (ver. 6B)
Posted to web 110817 |
Explosive
atmospheres – Part 0: Equipment – General requirements
|
|
|
|
|
ExTRs for IEC 60079-1 |
|
ExTR Number |
Title |
60079-1:1990
3rd ed.(ver.1a)
Amendments:
1 : 1993-08
2 : 1998-05 |
Electrical apparatus for explosive
gas atmospheres
Part 1: Construction and verification test of flameproof enclosures
of electrical apparatus |
60079-1:2001
4th ed.(ver.3)
Corrigendum 1
Amendments:
None |
Electrical apparatus for explosive
gas atmospheres
Part 1: Construction and verification test of flameproof enclosures
of electrical apparatus |
|
60079-1:2003
5th ed. (ver.5D)
Posted to
web 110817 |
Electrical apparatus for explosive
gas atmospheres
Part 1: Construction and verification test of flameproof enclosures
of electrical apparatus
(Note: This
updates and replaces the previous Part 1 5th edition ExTRs
issued in 2004 and 2005.)
|
|
60079-1:2007, 6th Ed (ver. 6C)
Posted to
web 110817 |
Explosive
atmospheres – Part 1: Equipment protection by flameproof
enclosures "d" |
|
|
|
|
ExTRs for IEC 60079- 2 |
60079-2:1983
3rd ed.(ver.1a)
Amendments:
None |
Electrical apparatus
for explosive gas atmospheres
Part 2: Electrical apparatus, type of protection 'p' (Pressurization) |
60079-2:2001
4th ed (ver.2a)
Amendments:
None |
Electrical apparatus
for explosive gas atmospheres
Part 2: Electrical apparatus, type of protection 'p' (Pressurization) |
|
IEC 60079-2:2007 5th ed. (ver
5C)
Posted to
web 110817 |
Explosive atmospheres – Part 2:
Equipment protection by pressurized enclosure "p"
|
|
|
|
|
ExTRs for IEC 60079- 5 |
60079-5:1997
2nd ed.(ver.2)
Amendments:
A1 |
Electrical apparatus
for explosive gas atmospheres
Part 5: Powder filling "q" |
|
|
|
|
60079-5:2007, 3rd Ed. (ver. 3C)
Posted to
web 110817
|
Explosive
atmospheres – Part 5:
Equipment protection by powder filling “q”
|
|
ExTRs for IEC 60079- 6 |
60079-6:1995
2nd ed.(ver.1a)
Amendments:
None |
Electrical apparatus
for explosive gas atmospheres
Part 6: Oil-immersion 'o' |
|
60079-6:2007 3rd ed.(ver.3C)
Posted to web 110817 |
Explosive
atmospheres – Part 6: Equipment protection by oil immersion
"o" |
|
|
|
|
ExTRs for IEC 60079- 7 |
60079-7:1990
2nd ed.(ver.1a)
Amendments:
1 : 1991-04
2 : 1993-04 |
Electrical apparatus
for explosive gas atmospheres
Part 7: Increased safety 'e' |
60079-7:2001
3rd ed.(ver.3)
Amendments:
None |
Electrical apparatus for explosive gas
atmospheres
Part 7: Increased safety 'e' |
60079-7:2001
3rd ed.(ver.4a)
Amendments:
None |
Electrical apparatus for explosive gas
atmospheres
Part 7: Increased safety 'e'
Please note: ExTR 60079-7 (Version 4a), which is
specifically for Ex ‘e’ terminal blocks, is a modified
format of a previously issued ExTR. This version has been
issued to take into account changes resulting from the
publication of IEC 60079-0 2004. It is presented as a
consolidated version of 60079-0:2004 and 60079-7:2001 |
|
60079-7:2006
4th ed.(ver.4C)
Posted to web 110817 |
Explosive atmospheres – Part 7:
Equipment protection by increased safety “e”
|
|
|
|
|
ExTRs for IEC 60079- 11 |
60079-11:1991
3rd ed.(ver.1a)
Amendments:
None |
Electrical apparatus
for explosive gas atmospheres
Part 11: Intrinsic safety 'i' |
60079-11:1999
4th ed.(ver.3)
Amendments:
None |
Electrical apparatus
for explosive gas atmospheres
Part 11: Intrinsic safety 'i'
Please note: ExTR 60079-11 1999 (Version 3) is a modified format
of previously issued ATRs, now ExTRs. Should you
have any comments or questions relating to this modified format please
do not hesitate to contact the IECEx Secretariat at
chris.agius@iecex.com
|
60079-11:1999
4th ed.(ver.4)
Amendments:
None |
Electrical apparatus
for explosive gas atmospheres
Part 11: Intrinsic safety 'i'
Please note: ExTR 60079-11 1999 (Version 4) is a
modified format of a previously issued ExTR. This version has
been issued to take into account changes resulting from the
publication of IEC 60079-0 2004. Should you have any comments
or questions relating to this modified format please do not
hesitate to contact the IECEx Secretariat at
chris.agius@iecex.com |
|
60079-11:2006, 5th Ed (Ver. 5B-1)
Posted to web 110923 |
Explosive atmospheres -
Part 11: Equipment protection by intrinsic safety "i"
|
|
60079-11:
2006 5th ed. (Ver.5B-2)
Posted to web 110928
(2.3 MB)
|
Explosive
atmospheres - Part 11: Equipment protection by intrinsic
safety "i"
(This ExTR blank document is a modified version of TRF No.
ExTR60079-11_5B-1. This modified version is [1] a
consolidated report, comprising all the requirements of IEC
60079-0:2004 4th edition and IEC 60079-11:2006 5th edition;
and [2] structured more in a narrative format versus a
checklist format.)
|
|
60079-11:2011 6th ed. (ver.6A)
Posted to web 110720 |
Explosive
atmospheres – Part 11: Equipment protection by intrinsic
safety "i"
|
| |
|
|
ExTR for 60079-13 |
|
60079-13:2010 1st Ed. (Ver. 1A)
Posted to web 110825 |
Explosive atmospheres – Part 13:
Equipment protection by pressurized room “p” |
| |
|
|
ExTRs for IEC 60079- 15 |
60079-15:1987
1st ed.(ver.1a)
Amendments:
None |
Electrical apparatus
for explosive gas atmospheres
Part 15: Electrical apparatus with type of protection 'n' (Non-Sparking) |
60079-15:2001
2nd ed.(ver.2a)
Amendments:
None |
Electrical apparatus
for explosive gas atmospheres
Part 15: Electrical apparatus with type of protection 'n' (Non-Sparking) |
|
60079-15:2005
3rd ed.(Ver.3C)
Amendments:
None
Posted to web 110720 |
Electrical apparatus for explosive gas
atmospheres – Part 15: Construction, test and marking of type
of protection "n" electrical apparatus |
|
60079-15:2010
4th ed. (Ver.4B)
Posted to web 110721 |
Explosive atmospheres - Part 15:
Equipment protection by type of protection "n" |
|
|
|
|
ExTRs for IEC 60079- 18 |
60079-18:1992
1st ed.(ver.1a)
Amendments:
None |
Electrical apparatus
for explosive gas atmospheres
Part 18: Encapsulation 'm' |
60079-18:2004 2nd ed.(ver.2a)
Amendments:
None |
Electrical apparatus
for explosive gas atmospheres
Part 18: Encapsulation 'm'
|
|
60079-18:2009 3rd ed.(ver.3B)
Posted to web 2010 08 19 |
Explosive atmospheres – Part 18: Equipment protection by
encapsulation "m"
|
|
|
|
|
ExTRs for IEC 60079- 25 |
60079-25:2003 1st ed.(ver.1a)
Amendments:
None |
Electrical apparatus for explosive gas
atmospheres
Part 25: Intrinsically safe systems |
|
60079-25:2010 2nd ed. (ver. 2A)
Posted to web
100819 |
Explosive
atmospheres – Part 25: Intrinsically safe electrical systems
|
|
|
|
ExTRs for IEC 60079- 26 |
60079-26:2004
1st ed.(ver.1)
Amendments:
None |
Electrical apparatus for explosive gas
atmospheres
Part 26: Construction, test and marking of Group II Zone 0
electrical apparatus |
|
60079-26:2006 2nd ed. (ver. 2)
Posted to web 070808 |
Explosive atmospheres
Part 26: Equipment with equipment protection level (EPL) Ga |
|
|
|
|
ExTRs for IEC 60079- 27 |
|
60079-27:2002
1st ed.(ver.1)
Document is a TS
Amendments:
None
|
Electrical apparatus for explosive gas
atmospheres
Part 27: Fieldbus intrinsically safe concept (FISCO) |
60079-27:
2005 1st ed.(ver.2)
Amendments:
None |
Electrical apparatus for explosive gas
atmospheres
Part 27: Fieldbus intrinsically safe concept (FISCO) and
Fieldbus non-incendive concept (FNICO) |
|
60079-27:2008,
2nd ed.(Ver. 2A)
Posted to
web 100820 |
Explosive
atmospheres - Part 27:
Fieldbus intrinsically safe concept (FISCO)
|
|
|
|
|
|
|
|
ExTRs for IEC 60079- 28 |
|
60079-28:2006 1st ed. (ver. 1) |
Explosive Atmospheres
Part 28: Protection
of equipment and transmission systems using optical
radiation |
|
|
|
|
ExTRs for IEC 60079- 29- 1 |
|
60079-29-1 1st ed.(ver.1a) |
Explosive atmospheres –
Part 29-1: Gas
Detectors –
Performance Requirements of Detectors for Flammable Gases
|
|
|
|
|
ExTRs for IEC 60079- 29- 4 |
|
60079-29-4:2009 1st ed. (Ver. 1A)
Posted to web 110825 |
Explosive atmospheres –
Part
29-4:
Gas detectors – Performance requirements of open path
detectors for flammable gases. |
|
|
|
|
ExTRs for IEC 60079 - 30 - 1 |
|
60079-30-1:2007 1st ed. (ver.1) |
Explosive Atmospheres - Electrical
Resistance Trace Heating - General and testing requirements |
|
|
|
|
ExTRs for IEC 60079- 31 |
|
60079-31:2008 1st ed. (ver. 1A)
Posted to
web 20091021 |
Explosive
atmospheres –
Part 31 : Equipment dust ignition protection by enclosure
“t” |
|
|
|
|
ExTRs for 60079-35-1 |
|
60079-35-1:2011 1st Ed. (Ver. 1A)
Posted to web
110825 |
Explosive atmospheres –
Part
35-1:
Caplights for use in mines susceptible to firedamp – General
requirements – Construction and testing in relation to the
risk of explosion.
|
|
|
|
|
ExTRs for IEC 61241 - 0 |
61241-0:2004 1st ed. (ver.1C)
|
Electrical Apparatus for Use in the
Presence of Combustible Dust –
Part 0: General Requirements |
|
|
|
|
ExTRs for IEC 61241 - 1 |
61241-1:2004 1st ed.(ver.1)
Amendments:
None |
Electrical apparatus for use in the
presence of combustible dust
Part 1: protection by enclosures "tD" |
|
|
|
|
ExTRs for IEC 61241 - 1 - 1 |
61241-1-1:1993
1st ed.(ver.1a)
Amendments:
None |
Electrical apparatus
for use in the presence of combustible dust
Part 1: Electrical apparatus protected by enclosures
Section 1: Specification for apparatus |
61241-1-1:1999
2nd ed.(ver.2a)
Amendments:
None |
Electrical apparatus
for use in the presence of combustible dust
Part 1: Electrical apparatus protected by enclosures
Section 1: Specification for apparatus |
|
|
|
|
ExTRs for IEC 61241 - 4 |
61241-4:2001
1st ed.(ver.1a)
Amendments:
None |
Electrical apparatus
for use in the presence of combustible dust
Part 4: Type of Protection “pD” |
|
|
|
|
ExTRs for IEC 61241 - 11 |
|
61241-11:2005
1st ed.(ver.1) |
Electrical
apparatus for use in the presence of combustible dust
- Part
11: Protection by intrinsic safety 'iD' |
|
|
|
|
ExTRs for IEC 61241 - 18 |
|
IEC 61241-18: 2004 1st ed.(ver.1a) |
Electrical Apparatus for Use in the
Presence of Combustible Dust –
Part 18: Protection by Encapsulation “mD”
|
|
|
|
|
ExTRs for 61779 - 1 |
61779-1:1998
1st ed.(ver.1a)
Amendments:
None |
Electrical apparatus
for the detection and measurement of flammable gases
Part 1: General requirements and test methods |
|
|
|
|
ExTRs for 61779 - 2 |
61779-2:1998
1st ed.(ver.1a)
Amendments:
None |
Electrical apparatus
for the detection and measurement of flammable gases
Part 2: Performance requirements for group I apparatus indicating a
volume fraction up to 5% methane in air |
|
|
|
|
ExTRs for 61779 - 3 |
61779-3:1998
1st ed.(ver.1a)
Amendments:
None |
Electrical apparatus
for the detection and measurement of flammable gases
Part 3: Performance requirements for group I apparatus indicating a
volume fraction up to 100% methane in air |
|
|
|
|
ExTRs for 61779 - 4 |
61779-4:1998
1st ed.(ver.1a)
Amendments:
None |
Electrical apparatus
for the detection and measurement of flammable gases
Part 4: Performance requirements for group II apparatus indicating
up to 100% lower explosive limit |
|
|
|
|
ExTRs for 61779 - 5 |
61779-5:1999
1st ed.(ver.1a)
Amendments:
None |
Electrical apparatus
for the detection and measurement of flammable gases
Part 5: Performance requirements for group II apparatus indicating
a volume fraction up to 100% gas |
|
|
|
|
ExTRs for 62013 - 1 |
|
62013-1:2005
2nd ed.(ver.1) |
Cap-lights
for use in mines susceptible to firedamp –
Part
1: General testing requirements –
Construction
and testing in relation to the risk of explosion |
|
|
|
|
ExTRs for 62013 - 2 |
|
62013-2:2005 2nd ed.(ver.1)
Posted to Web
080905 |
Caplights for use in mines susceptible to firedamp - Part 2:
Performance and other safety-related matters
|
|
|
|
|
ExTRs for 62086 - 1 |
62086-1:2001 1st ed.(ver.1)
Amendments:
None |
Electrical apparatus for explosive gas
atmospheres – Electrical resistance trace heating - Part 1:
General and testing requirements |
ExMC